Why is one radiator cold when the others are hot?
Usually a balancing problem — water takes the path of least resistance and starves the furthest radiator. It can also be a stuck thermostatic valve or sludge. Balancing adjusts flow to each radiator so heat spreads evenly.
What should I do if I smell gas at my Jordanhill & Anniesland property?
Treat it as an emergency. Leave the property, don't touch light switches or anything that could spark, and call the National Gas Emergency Service on 0800 111 999 straight away — before calling us. They attend free, around the clock, and will isolate the supply if needed. Once it's safe, we'll come out to repair the pipework or appliance, and about 22 minutes away.
What does balancing a heating system involve?
Adjusting the lockshield valve on each radiator so flow is distributed correctly across the whole system, measuring the temperature difference between flow and return at each one. It's methodical rather than quick, but it makes a real difference to comfort and running cost.
Do I need to be home for the engineer?
Someone over 18 needs to provide access and be there while gas work is carried out at your Jordanhill & Anniesland property. If you're arranging it for a tenant or an elderly relative, that's fine — just give us their contact details when you book so we can coordinate directly.
My radiator is cold at the bottom but hot at the top — why?
That's sludge and corrosion debris settling in the bottom of the radiator, not trapped air. Bleeding won't help. It usually calls for a power flush or, if the radiator is badly affected, replacement.
Why is my boiler losing pressure?
Most often a small leak somewhere in the system, a worn pressure relief valve, or a failing expansion vessel. Topping up occasionally is normal; needing to do it every few days is not. Given the age of the heating in many Jordanhill & Anniesland properties, a pressure test is usually the quickest way to find the cause.
Should I bleed my radiators myself?
Bleeding to release trapped air is a reasonable DIY job — turn the heating off, use a bleed key, catch drips with a cloth. Check the boiler pressure afterwards, as bleeding lowers it and you may need to top up.
Can you fit radiators or move one in Jordanhill & Anniesland?
Yes — new radiator installs, replacements and relocations, sized properly for the room rather than guessed. We'll balance the system afterwards so every room in your Jordanhill & Anniesland home heats evenly instead of one being roasting and another cold.
Can you move a radiator to another wall?
Yes. Relocations are common during kitchen and bathroom renovations. We'll advise whether the new position works for heat distribution — under a window is traditional for good reason, though modern insulation makes it less critical.
Do you take card payment in Jordanhill & Anniesland?
Yes — card or bank transfer, paid on completion unless we've agreed otherwise in writing beforehand. You'll have the itemised price before any work starts, so there are no surprises when it comes to settling up in Jordanhill & Anniesland.
